5050 60 lights 5-meters full 24 keys 5A Power Supply LED light strip

Light strip installation method steps

1. Cut to the corresponding length. Generally, the light strips that we directly buy are all ready-made. This is why we need to cut the relevant length according to our actual use needs. When cutting, we must pay attention to cutting according to the end point SMD LED Lights.

2. After cutting the length of the light strip, we insert the thread needle of the light strip into the place where there is no patch at one end of the light strip SMD LED Lamp Beads.

3. Connect the pin with the plug of the light strip. At this time, the plug can be energized. At this time, one thing to note is that we must check the access point again before inserting it, and there must be no water stains.

4. After plugging in, if the light strip glows normally, on the one hand, it means that our installation steps are correct, and on the other hand, it means that there is no problem with the light strip itself Smd Lights With Led.

Box rules:
50 sets/box
50*45*35