Why the price of LED lamp beads is so different?

Led Lamp Beads play a vital role in LED display screens, but many people don't know much about the price of LED Lamp Beads. What makes the price of LED Lamp beads so different? Look at the following introduction to understand clearly, let's take a look at the price of LED lamp beads and its influencing factors!

LED size

The price of LEDs of different specifications is different. For example, the price of 0603 LED and 1210 or 3528 LED are quite different; and the price of LED of 1210 and 5050 specifications is another step. Don't just pay attention to the price when buying LED lamp beads. It should be comprehensively assessed from the following aspects in order to purchase high-quality and low-cost LED lamp beads.

LED lamp chip

There are domestic and Taiwanese chips as well as imported chips (including American chips, Japanese chips, German chips, etc.). The price varies greatly depending on the chip. At present, the most expensive American chips are followed by Japanese chips and German chips. The lowest-priced Taiwanese chips have poor heat dissipation performance. What chip is used? What kind of effect do you want to achieve? Be sure to know before you buy.

LED package

Divided into resin packaging and silicone packaging. The price of resin encapsulation is cheaper. Everything else is the same. Silicone encapsulation has good heat dissipation performance, so the price is slightly more expensive than resin encapsulation.

Consistency of LED color

At present, there are many packaging factories in China. There are thousands of companies, big and small, and of course there are strengths and weaknesses. There are many small packaging factories that do not have spectroscopy and color separation machines, so they either do not perform spectroscopy or are outsourced, which makes it difficult to guarantee the quality. The color consistency of LEDs that have not undergone light and color separation is poor, and the effect after lighting on the LED lamp beads is not so good, of course, the price difference is relatively large.

LED welding effect

The assembly of LED lamp beads is divided into manual welding and machine welding. Manual soldering is to use a soldering iron, using the most primitive method for soldering. The products with this kind of operation are ugly in appearance (the solder joint size is inconsistent, Fuzhou LED electronic display screen), and the electrostatic maintenance measures are not good. Many LED chips are broken down, which causes the phenomenon of dim light or no light when power is on. Machine soldering uses reflow soldering, but machine soldering is different. Not only the appearance of the soldered product is beautiful (the solder joints are the same size, the solder joints are smooth, there is no flux residue, and the LED package is intact), but the chip will not be burnt by static electricity. At the same time, the LED position and direction are more beautiful. This can be seen directly from the appearance.

FPC material

FPC is divided into two types: rolled copper and copper-clad. Copper-clad boards are cheaper, and rolled copper is more expensive. The pads of the copper-clad board are easy to fall off when bent, but the rolled copper will not. The specific FPC material to be used depends on the seller's decision according to the environment in which it is used.

Has FPC been certified for environmental protection and UL certification? Does the LED have patents? There is no low price. Certified and patented ones are more expensive.

LED brightness

The price of LEDs with different brightness is different. The price difference between ordinary brightness and high brightness LED is quite large. Therefore, you must clearly know what kind of brightness you need when buying, so that you can accurately locate your product SMD LED Lamp Beads.

LED color

The colors are different. The price is different. Red and green are more difficult to match and separate, so the price is higher than other colors; red, yellow, blue and other colors are easier to separate and have better consistency, so the price is slightly cheaper. Special colors such as purple and brown are the most expensive due to color matching reasons High-Power Purple Lamp Beads.