1. It can be bent at will and fixed anywhere on the uneven surface;
2. Small size and various colors;
3, high brightness, adjustable luminous angle;
4, can be customized, can be customized according to requirements;
5. Using constant current drive, low power consumption;
6. Long service life.
SMD LED Lamp Bead storage method 1. Before using the product, do not open the moisture-proof bag of the product. Before opening the product, ensure that the temperature is below 30°C and the humidity is below 60%. The shelf life is one year.
2. If the package is opened, it needs to be stored at 30°C/40% humidity, and it must be completed within 7 days.
3. If the moisture-absorbing material has disappeared or exceeds the storage time and drying treatment, then the following conditions must be used at 60±5°C for 2 hours.
Smd Led Lamp Beads advantages One. Small size: The side-emitting SMD LED is basically a small chip encapsulated in epoxy resin, which is very small, which is convenient for the design of various light source equipment.
2. Pure color: The side-emitting SMD LED Light color is pure, soft and non-glare. It can be used for decoration and lighting.
Three. Low heat: The power of a single side-emitting SMD LED is very low, generally 0.04~0.08W, and the light efficiency is high, so the heat is not high. Therefore, LED lamps can be used as decorative lighting in the fish tank without generating a large amount of heat and causing the water temperature to rise, which affects the growth of ornamental fish.
Fourth, energy saving: high luminous efficiency and low heat generation make the LED components super energy-saving. Compared with traditional lighting and decorative lamps, the power of LED lamps is several times lower, but the effect is much higher.
5. Low radiation: there is no ultraviolet and infrared in the spectrum, neither heat nor radiation, low glare, cold light source, safe to touch, it is a typical green lighting source
6. Environmental protection: Whether the LED flexible light bar is composed of LED or FPC, its material is made of environmentally friendly materials, which are recyclable and will not cause environmental pollution and damage due to large-scale use.
7. Low power requirements: The voltage required for side-emitting SMD LEDs is very low. A small number of light sources can be matched with a linear constant current driver to perfectly achieve efficient, safe and stable LED work.
8. Fast response speed: Lanjin side-emitting SMD LED does not require warm-up time, and the sensitivity is about 10^-9 seconds, allowing it to be used in various high-precision test instruments LED Light Board Patch.
Nine, sturdy and durable: LED is completely encapsulated in epoxy resin, which is stronger than light bulbs and fluorescent tubes. There is no loose part in the lamp body, so that the LED is not easily damaged Led Chip Processing.
10. Long lifespan: The normal lifespan of LED lamps is 50,000 to 100,000 hours. If they work 24 hours a day, their lifespan is almost 10 years. Therefore, the life span of LED lamps is several times longer than that of traditional lamps LED Strip Patch.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
We will contact you immediately
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
